The ICF-C318 has a nice sleek finish of white gloss, and its compact design is beautifully crafted to match any interior without taking up too much space. It's very handy and easy to use, and with the dimensions of 155 x 82.8 x 151.5mm, you won't have any problems fitting it on your bedside table with the lamp, a bottle of wine, and your favorite pocket book. It's also extremely lightweight with a mere weight of 1.2 pounds, easy enough to carry to different rooms, and even to different places if you're out for travel. However, it does depend on a power supply, but the cobalt properties battery back-up serves great as a savior for power outages and plug problems.
There are several types of battery in use at the present time and each must be treated differently. There are Nickel-Cadmium (Ni-Cad), Nickel-Metal Hydride (NiMH) and Lithium-ion. Ni-Cad is old technology and hence only found in ancient handsets, so I will not be covering them in this article. NiMH batteries perform much better than Ni-Cad, typically giving 30% more talk time, but Lithium are thinner and give even higher performance. I will be concentrating on lithium facts-ion as it is the most used modern mobile phone battery to date. Check which type of battery your phone has before following any of the following.
Nickel-Cadium - Ni-Cd batteries is one of the oldest and best performance types of rechargeable batteries but it has a major problem. After a long usage ( a few years), the battery will suffer from the dreaded memory effect. This means that the lifespan usage of the battery will deteriorate as time goes by.
The mating lithium bettery stock process between the two engines can be in series or in parallel. When the two powertrains are mated in series, only one of the motors controls the cars movement. The other one simply assists the first, dominant engine. This occurs most often in mild or assist hybrids. The Saturn Vue Green Line Belt Alternator System (BAS) is a good example. The concept vehicle named the Volt from GM is another good example of a series (but not a mild) hybrid.
Li-ion cells have a good peak output current and low source resistance. When you overload the tool, the voltage stays up, and they just keep pumping current into the motor. Power tools have thermal overload trips in the motors, and that's a good thing with Li-ion batteries, if they didn't they'd just burn the motor out!
Today, many of the latest computers have a fast recharge feature where you can recharge 90 percent of the battery power by charging it for around one hour. The balance 10 percent is recharged slowly. If your laptop has this facility, do use it. This helps to extend the life of the battery. However, do not recharge the laptop battery until it has less than 30 percent charge remaining.